Step 1: Insert the silicone insert into the mini heater and fill it with your chosen wax beads.

Step 2: Securely place the lid on top and lock it into position.

Step 3: Plug the mini heater into a USB connector and confirm the red indicator light is on.

Step 4: If your insert is full, wait approximately 12-15 minutes (5-6 minutes if half full) until the green indicator light appears. Remove the lid and stir the melted wax with the mini spatulas.

Step 5: Test the wax temperature by swatching a small amount on the inside of your wrist. The wax should feel comfortably warm on the skin for 3-4 seconds. If it’s too hot, remove the lid and wait a few extra minutes for it to cool down.

Step 6: Once the wax reaches the ideal temperature, begin applying it to the desired areas.

Step 7: After waxing is complete, unplug the heater and allow it to cool completely before storing it away.

Important Tips:

Use only hard wax in the mini heater.

The lid accelerates the warming process. If the wax becomes too warm, remove the lid and let it sit for a few additional minutes.

The mini heater must be plugged into a USB connector to operate.

This heater is intended to be used with hard wax beads! Simply pour your hard wax beads in, turn your heater on and you are ready to go!

The best part? Due to the silicone inserts, once your hard wax has dried you can simply pop it out and your insert is squeaky clean ready for a new wax if you want to switch!

CE, FCC certification

Heater Size: 52*40mm
Silicone Insert Capacity: 8g (Hard wax Beads)
Power: 4.5W

Warranty: 12 months